-
Biomechanical Analysis of Korean Radiolucent Carbon/Graphite Ring Fixator
-
In Ho Choi, Jun kyung Kim, Kui won Choi, Chin Youb Chung, Tae Joon Cho, Ki Seok Lee
-
J Korean Soc Fract 2000;13(1):1-12. Published online January 31, 2000
-
DOI: https://doi.org/10.12671/jksf.2000.13.1.1
-
-
 Abstract
 PDF
- PURPOSE
The mechanical stiffness of Korean radiolucent carbon/graphite ring fixator(KRCRF) was analyzed and compared with those of conventional stainless steel Ilizarov system and the Smith- Nephew carbon fiber circular external fixator.
MATERIALS AND METHODS
The transfixing olive pins of the circular fixator on the acryl pylon were assembled in 90degrees- 90degrees and 135degrees- 45degrees configuration, respectively. And the fixator-pylon model was loaded with Instron model No. 8500 in three testing modes: axial compression, anteroposterior(AP) bending and lateral bending.
RESULTS
As compared with stainless steel Ilizarov fixator, the KRCRF was significantly more stiff on the axial compression test regardless of the ring size(140 mm and 200 mm diameters) and transfixation configuration. But, it was less stiff on the anteroposterior(AP) and lateral bending tests. When compared with the Smith-Nephew carbon fiber circular external fixator, the KRCRF was generally more stiff on the axial compression, AP and lateral bending tests regardless of the ring size(140 mm and 180 mm diameters) and configuration, except the AP bending stiffness in 90degrees- 90degrees configuration and lateral bending stffness in 135degrees- 45degrees configuration on the 180 mm diameter frame.
CONCLUSION
Considering the radiolucency, weight and biomechanical stffness, we think that the KRCRF is an excellent substitute for the imported circular fixators made of stainless steel or carbon/graphite.
-
Citations
Citations to this article as recorded by  - A Study on the Development of the Off-Line Software for Regulating the 6 D.O.F. Circular Fixator
Bum-Seok PARK, In-Ho CHOI, Jin-Woo KIM, Seung-Yeol LEE, Chang-Soo HAN
JSME International Journal Series C.2006; 49(4): 1123. CrossRef
-
138
View
-
0
Download
-
1
Crossref
|
E-submission
KFS
